1100T Used Aluminum Extrusion Press
Factory number: 1100-30
Factory date: April 2013
Extrusion capacity: 1100T
System pressure: 210Bar
Billet diameter: 120MM
Billet length: 650MM
Installed power: 180KM
|Master cylinder||35# forged steel|
|Main piston||Φ750mm alloy chilled cast iron|
|Four clamping cylinders||Φ160mm|
|Front beam||thickness 500mm cast steel ZG270-500|
|Discharge port||Φ155 mm×Φ180mm oval|
|Die base||thickness 240mm 35# forged steel|
|Movable beam||thickness 260mm cast steel ZG270-500|
|Insulation base cast||steel ZG270-500|
|Rod||Φ200mm 35# forged steel quenching treatment|
Oil hydraulic pump
Extrusion pump: Variable delivery axial piston pump
Auxiliary pump： KD-A4VSO250 (KEDA)
Pilot pump： Constant delivery pump(VICKERS)
Sep.sealing pump： Variable delivery axial piston pump
Electric motor and heater
Main motor： Induction motor
Auxiliary motor： Induction motor
Container heater： Electric resistance type 22.5KW at 420℃
Total power： 180KW
Velocity-Pressure-Current Closed-Loop Extrusion Process Control
Closed-Loop Velocity Control & Velocity Attenuation Control (Isothermal)
Digital Proportional Amplifier Control
Upsetting Pressure Switch, Pressure Ramp and Breakpoint Detect
Actual Position, Attenuation Position and Butt Length Control
Command Input: Potentiometer / Push Button / Serial Interface
How To Maintain A Used Aluminum Extruder?
Maintenance and maintenance of used aluminum extruders need to follow the following principles:
Conduct a comprehensive inspection of the second-hand aluminum extrusion machine according to the equipment instruction manual or the time interval suggested by the supplier, and deal with the problem in time to prevent the small fault from becoming a big fault.
Clean the second-hand aluminum extruder according to the equipment instruction manual or the method suggested by the supplier, remove dust, oil, debris, etc., and keep the equipment clean, tidy, and unobtrusive.
lubricate the second-hand aluminum extruder according to the variety, quantity, location, and frequency suggested by the equipment instruction manual or the supplier, reduce friction, wear, heat, and other phenomena, and extend the life of the equipment.
According to the service manual of the equipment or the supplier’s recommended life, performance, conditions, etc., the second-hand aluminum extrusion machine is easy to replace the parts, such as seals, filters, oil, etc., to keep the equipment in good condition.