What Is aluminum extruder interior parts
Aluminum extruder internal accessories refer to various parts and components used for aluminum extruder, such as master cylinder, extrusion rod, extrusion pad, inner liner, mold frame, extrusion press front arch, pressure washer, etc. These accessories can help aluminum extruders achieve different functions and performance, such as stability, movement, connection, fixation, regulation, protection, etc. There are many types and specifications of the internal parts of the aluminum extrusion machine, which can be selected and assembled according to the model and use of the aluminum extrusion machine.
Tell Us About The Aluminum extruder interior parts You Need
The parameters of our company’s Aluminum extruder interior parts products are for reference only. In reality, if you provide us with your requirements, we will assist you in finding suitable machine components.
The master cylinder is the main hydraulic component of the aluminum extruder, which is used to generate extrusion pressure and extrude the aluminum billet into shape. The master cylinder is composed of a cylinder body, plunger, seal, bracket, etc.
The extrusion rod is the main transmission element of the aluminum extrusion press, which is used to transfer the extrusion pressure of the master cylinder to the aluminum billet so that the mold extrudes the aluminum billet. The extrusion rod is composed of a rod body, etc.
The extrusion pad is the main protection element of the aluminum extrusion press, which is used to isolate the extrusion rod and the aluminum billet and prevent direct contact between the extrusion rod and the aluminum billet, resulting in damage to the extrusion rod or pollution of the aluminum billet.
The inner tank is the main heat exchange element of the aluminum extrusion machine, which is used to heat or cool the aluminum billet to reach the temperature suitable for extrusion. The inner liner is composed of an inner liner body, an electric heating pipe, a cooling water pipe, etc.
The mold frame is the main fixed component of the aluminum extrusion press, which is used to install and fix the mold, ensure the stability and alignment of the mold, and good coordination with the aluminum billet. The mold frame is composed of a frame body etc.
The pressure washer is the main buffer element of the aluminum extrusion machine, which is used to disperse and buffer extrusion pressure, and protect components such as the extrusion cylinder, die, and extrusion rod from excessive stress or impact. The pressure washer is composed of a washer body etc.
View More Pictures
- Process
- Data Sheet
- Details
We provide used aluminum extrusion machines, second-hand aluminum extrusion production line machinery and equipment, and other machinery and spare parts related to the aluminum extrusion industry.
Machinery includes nitriding furnace, multi-rod furnace, cooling bed, tractor, etc.
Related Product
Aluminum extruder interior parts matters need attention
The working pressure of the master cylinder should be within the design range, and should not be overloaded or unloaded to avoid damage to the cylinder block or plunger.
The hydraulic oil of the master cylinder should be replaced and filtered regularly to keep the oil clean and lubricated to prevent oil contamination or oxidation.
The seals of the master cylinder should be checked and replaced regularly to prevent oil leakage or air entry, affecting the extrusion effect and safety.
The support of the master cylinder should be kept firm and stable to prevent vibration or offset during extrusion, resulting in deformation or fracture of the cylinder or plunger.
The material of the extrusion rod should have sufficient strength, toughness, and wear resistance to withstand high temperature, high pressure, and high-speed extrusion conditions.
The surface of the extrusion rod should be kept smooth and clean, and lubricant should be applied regularly to reduce friction and wear with the aluminum billet and the extrusion cylinder.
The thimble of the extrusion rod should match the size and shape of the aluminum billet to ensure the alignment and uniform extrusion of the aluminum billet and avoid the deviation or deformation of the aluminum billet.
The adjusting pad of the extrusion rod should be properly adjusted according to the length of the aluminum billet and the position of the die, so as to ensure reasonable control of the stroke and speed of the extrusion rod and avoid the overshoot or withdrawal of the extrusion rod.
The material of the extrusion pad should have good heat resistance, pressure resistance, and wear resistance to withstand high temperature, high pressure, and high-speed extrusion conditions.
The size and shape of the extrusion pad should match the thimble of the aluminum billet and the extrusion rod to ensure the tight fit and uniform distribution of the extrusion pad and avoid the displacement or deformation of the extrusion pad.
The gasket of the extrusion pad should be checked and replaced regularly to prevent the extrusion pad from breaking or falling off, affecting the extrusion effect and safety.
The material of the inner liner should have good thermal conductivity, electrical conductivity, and wear resistance to ensure effective heating or cooling of the inner liner and good contact with the aluminum billet.
The temperature of the inner tank should be properly controlled according to the requirements of the material and mold of the aluminum billet, so as to avoid the temperature being too high or too low, which will affect the fluidity and quality of the aluminum billet.
The electric heating pipe and cooling water pipe of the inner tank should be checked and cleaned regularly to keep the circuit unobstructed and the waterway smooth, to prevent the burning of the electric heating pipe or the blockage of the cooling water pipe, affecting the heating or cooling effect of the inner tank.
The material of the mold frame should have sufficient strength and stiffness to withstand extrusion pressure and extrusion temperature to prevent deformation or fracture of the mold frame.
The locking device of the mold frame should be able to firmly and reliably lock the mold to prevent the mold from loosening or sliding during the extrusion process, affecting the extrusion effect and safety.
The adjustment device of the mold frame should be able to flexibly and accurately adjust the position and Angle of the mold, ensure the alignment and level of the mold, and uniform extrusion with the aluminum billet to avoid the skew or tilt of the mold.