used aluminum extrusion press banner

Special Fan For Aluminum Equipment

Special Fan For Aluminum Equipment

Specially designed for aluminum equipment, it can provide efficient heat dissipation and ventilation, extend the service life of the equipment, reduce energy consumption and noise. This kind of fan is usually made of cast aluminum and has the characteristics of lightweight, durable, anti-corrosion, anti-oxidation and so on.

Tell Us About The Special Fan For Aluminum Equipment You Need

The parameters of our company’s Special Fan For Aluminum Equipment products are for reference only. In reality, if you provide us with your requirements, We will help you find the right Heat Resistant Felt for you.

combustion fan

 

The fan has the characteristics of low speed, high efficiency, less energy consumption, large air volume, low noise, flat curve, etc. It is the ideal fan used in aging furnace and annealing furnace conditions to ensure uniformity in the furnace and achieve the ideal process requirements.

Double-suction fan

 

The fan has the characteristics of low speed, high efficiency, less energy consumption, large air volume, low noise, flat curve, etc. It is the ideal fan used in aging furnace and annealing furnace conditions to ensure uniformity in the furnace and achieve the ideal process requirements.

The fan has the characteristics of low speed, high efficiency, less energy consumption, large air volume, low noise, flat curve, etc. It is the ideal fan used in aging furnace and annealing furnace conditions to ensure uniformity in the furnace and achieve the ideal process requirements.

Boiler centrifugal induced draft fan

The fan has the characteristics of low speed, high efficiency, less energy consumption, large air volume, low noise, flat curve, etc. It is the ideal fan used in aging furnace and annealing furnace conditions to ensure uniformity in the furnace and achieve the ideal process requirements.

Casting furnace fan

 

The fan has the characteristics of low speed, high efficiency, less energy consumption, large air volume, low noise, flat curve, etc. It is the ideal fan used in aging furnace and annealing furnace conditions to ensure uniformity in the furnace and achieve the ideal process requirements.

Discharge table fan

 

The fan has the characteristics of low speed, high efficiency, less energy consumption, large air volume, low noise, flat curve, etc. It is the ideal fan used in aging furnace and annealing furnace conditions to ensure uniformity in the furnace and achieve the ideal process requirements.

6 Products Found.

View More Pictures

  • I am the owner of a small aluminum processing plant and I need an aluminum extruder to expand my business. I searched many companies on the Internet and finally chose this company’s used aluminum extruder. I’m glad I made the right choice because the machine fits my needs perfectly and the price is very good. I have produced many orders with it and the customers are very satisfied.

    Customer Evaluation
  • I am the manager of a large aluminum production company, and I need an aluminum extrusion machine to improve my production capacity and quality. I bought a used aluminum extruder from this company that works seamlessly with my other equipment to automate production. This machine is very stable and durable, and there have been no breakdowns or problems. It brings more profit and competitiveness to my business.

    Customer Evaluation
  • I am an engineer and I need an aluminum extruder to develop and test my new products and solutions. I bought a used aluminum extruder from this company and it fits my requirements very well because of its powerful performance and flexible configuration. It can be adjusted and optimized according to my needs to produce aluminum products that meet my standards and specifications. It has provided me with a lot of support and help in my engineering projects.

    Customer Evaluation
About Us

We provide used aluminum extrusion machines, second-hand aluminum extrusion production line machinery and equipment, and other machinery and spare parts related to the aluminum extrusion industry.
Machinery includes nitriding furnace, multi-rod furnace, cooling bed, tractor, etc.

Related Product

Aluminum extruder interior parts matters need attention

 

Precautions for the use of the master cylinder are:

The working pressure of the master cylinder should be within the design range, and should not be overloaded or unloaded to avoid damage to the cylinder block or plunger.

The hydraulic oil of the master cylinder should be replaced and filtered regularly to keep the oil clean and lubricated to prevent oil contamination or oxidation.

The seals of the master cylinder should be checked and replaced regularly to prevent oil leakage or air entry, affecting the extrusion effect and safety.

The support of the master cylinder should be kept firm and stable to prevent vibration or offset during extrusion, resulting in deformation or fracture of the cylinder or plunger.

The use of extrusion rod precautions are:

The material of the extrusion rod should have sufficient strength, toughness, and wear resistance to withstand high temperature, high pressure, and high-speed extrusion conditions.

The surface of the extrusion rod should be kept smooth and clean, and lubricant should be applied regularly to reduce friction and wear with the aluminum billet and the extrusion cylinder.

The thimble of the extrusion rod should match the size and shape of the aluminum billet to ensure the alignment and uniform extrusion of the aluminum billet and avoid the deviation or deformation of the aluminum billet.

The adjusting pad of the extrusion rod should be properly adjusted according to the length of the aluminum billet and the position of the die, so as to ensure reasonable control of the stroke and speed of the extrusion rod and avoid the overshoot or withdrawal of the extrusion rod.

Precautions for the use of extrusion pads are:

The material of the extrusion pad should have good heat resistance, pressure resistance, and wear resistance to withstand high temperature, high pressure, and high-speed extrusion conditions.

The size and shape of the extrusion pad should match the thimble of the aluminum billet and the extrusion rod to ensure the tight fit and uniform distribution of the extrusion pad and avoid the displacement or deformation of the extrusion pad.

The gasket of the extrusion pad should be checked and replaced regularly to prevent the extrusion pad from breaking or falling off, affecting the extrusion effect and safety.

Precautions for the use of the liner are:

The material of the inner liner should have good thermal conductivity, electrical conductivity, and wear resistance to ensure effective heating or cooling of the inner liner and good contact with the aluminum billet.

The temperature of the inner tank should be properly controlled according to the requirements of the material and mold of the aluminum billet, so as to avoid the temperature being too high or too low, which will affect the fluidity and quality of the aluminum billet.

The electric heating pipe and cooling water pipe of the inner tank should be checked and cleaned regularly to keep the circuit unobstructed and the waterway smooth, to prevent the burning of the electric heating pipe or the blockage of the cooling water pipe, affecting the heating or cooling effect of the inner tank.

The use of mold frame precautions are:

The material of the mold frame should have sufficient strength and stiffness to withstand extrusion pressure and extrusion temperature to prevent deformation or fracture of the mold frame.

The locking device of the mold frame should be able to firmly and reliably lock the mold to prevent the mold from loosening or sliding during the extrusion process, affecting the extrusion effect and safety.

The adjustment device of the mold frame should be able to flexibly and accurately adjust the position and Angle of the mold, ensure the alignment and level of the mold, and uniform extrusion with the aluminum billet to avoid the skew or tilt of the mold.

Send Your Inquiry Today
Quick Quote
Scroll to Top
× How can I help you?